Cabinet one done

The single drawer unit is complete, with drawer slides installed for the top drawer and the wire-drawer units below. Some paint is needed and a top, but essentially that’s it. The ‘legs’ are attached with Festool Domino loose tenons and the rest is Kreg pocket holes; I’m experimenting to see which works best and where.

Single drawer unit in place

I also managed to cut and assemble the basic carcass of the oven unit, possibly the most cumbersome of the pieces I have to make. To make some contrast with the other units I’m rotating the ‘legs’ 90° so they will be 2” wide and 1½” deep. This will nicely surround the oven unit and provide a good clearance space.